Noticing an iPad Pro 10.5 white spot on screen can be frustrating, especially when it distracts from your work or streaming. This bright patch often shows up near the edge or center of the display and can worsen over time if left unchecked.
In most cases, it’s caused by pressure, heat, or internal wear on the backlight system. The good news? You can often diagnose the issue yourself before heading to a repair shop.
In this guide, we’ll explain what causes white spots, how to fix them, and how to protect your iPad Pro 10.5 from future screen damage.
Keep your iPad safe from pressure damage and drops with a rugged heavy-duty iPad case designed for long-lasting protection.
What Causes a White Spot on the iPad Pro 10.5 Screen
The white spot usually comes from pressure inside the iPad, right where the display cables sit too close to the back of the screen—about 3-4 inches above the home button.
Pressure Damage from the Display Backlight
The main culprit is display cable pressure. Those cables underneath the screen push up against the back of the display panel.
This pressure creates a bright white spot, most noticeable on white or light backgrounds.
Where it happens most:
- Typically 2-4 inches above the home button
- Lines up with the display connectors on the logic board
- Shows up as a circular or oval bright patch
Apple’s internal layout puts the display cables too close to the screen backing. Over time, just using your iPad makes the pressure worse.
Sometimes, gripping your iPad tightly—especially in landscape—makes the spot look brighter.
Heat or Battery Swelling Creating Bright Spots
Heat inside your iPad Pro 10.5 can make white spots appear or get worse. The processor and other parts generate heat just from normal use.
When things get too hot, internal parts can expand a little and push closer to your screen from behind.
Heat-related triggers:
- Using heavy apps for long stretches
- Charging while using demanding apps
- Leaving the iPad in direct sunlight
- Poor ventilation
Battery swelling is another issue. As lithium batteries age, they sometimes puff up. A swollen battery pushes against other parts inside.
This makes the pressure on the display cables even worse. If your iPad feels thicker than it used to, the battery might be swelling.
When Factory Defects or Aging Parts Are to Blame
Some iPad Pro 10.5 units had this problem from day one. Apple’s design just made white spots more likely as time went on.
The first and second gen 12.9-inch iPad Pro and all 10.5-inch Pro models share this layout flaw. Apple eventually changed things in later models.
Typical factory defects:
- Display cables too close to the screen backing
- Not enough padding between internal parts
- Weak adhesive that lets things shift over time
Even careful users can get white spots eventually. As adhesives age, parts shift and new pressure points form.
It usually starts as a faint spot and slowly gets brighter and more distracting.
Boost your productivity with a responsive iPad keyboard and mouse? set made for smooth typing and precise control.
How to Fix or Minimize the White Spot Problem
Most white spots on the iPad Pro 10.5 come from display cable pressure underneath the screen. You can try a few easy things—like checking for external pressure or updating your software—but honestly, most cases need a screen replacement.
Check for Screen Protector or Case Pressure
Cases or screen protectors sometimes make the white spot worse. Take off your screen protector completely and see if the spot fades a bit.
Check if your case is squeezing the iPad in certain places. Some cases pinch the screen when closed. Try going case-free for a few days.
Heavy stuff in your bag can also cause pressure. Don’t stack books or laptops right against your iPad. Use a padded sleeve or its own compartment.
Look for any bending in your iPad’s frame. Drops or bumps can bend the device and create new pressure points.
Try a Soft Reset or iOS Update to Rule Out Glitches
Software rarely causes white spots, but it’s worth ruling out. Hold the power and volume down buttons for 10 seconds until you see the Apple logo.
Update your iOS through Settings > General > Software Update. Sometimes display quirks get fixed in updates.
Restart your iPad by turning it off and on again. This clears temporary files that might mess with the display.
See if the white spot only shows up in certain apps. Open a few with white backgrounds. If the spot is everywhere, it’s probably hardware.
Reset all settings (Settings > General > Transfer or Reset iPad > Reset > Reset All Settings). This won’t erase your data, just resets display preferences.
When a Screen Replacement Is the Only Real Fix
The white spot usually comes from a display cable pressing into the back of the screen. That pressure makes a permanent mark that software can’t fix.
If you’re still under warranty, Apple might replace your iPad Pro 10.5. They’re well aware this is a common flaw.
Third-party shops can swap the screen for $200-400, depending on where you live. Always check for quality parts and some kind of warranty.
DIY repairs are risky. The iPad Pro 10.5 display is super delicate and cracks easily. You could break something else in the process.
Some people try using suction cups to gently lift the screen. Sometimes it helps, but honestly, it can just as easily crack the display.
Prevent Future Screen Damage with the Right Accessories
Good accessories can help protect your iPad Pro 10.5 from the pressure that causes white spots. The right case spreads out weight, and keeping things cool helps prevent heat-related screen issues.
Use a Protective Case to Avoid Pressure Points
A solid case spreads out any force across the whole back, instead of letting pressure build up in one spot.
Look for cases with reinforced corners and thick padding. Hard plastic shells are fine, but a soft inner layer adds better protection.
What to avoid:
- Flimsy, thin materials
- Hard ridges that press into the back
- Cases that flex or bend easily
- Poor fits with gaps
Keyboard cases can sometimes create extra pressure where they attach. Make sure the attachment points aren’t digging in too hard.
Swap out worn cases right away. Old padding can go flat and actually make things worse.
Keep Your iPad Cool and Away from Direct Heat
Heat causes screen layers to expand and separate, leading to white spots. The iPad Pro 10.5 already runs a bit warm, so extra heat is bad news.
Keep away from:
- Direct sunlight for long periods
- Hot car dashboards
- Heating vents
- Other warm electronics
When you’re not using it, store your iPad in a cool, dry spot. Room temp is your friend.
Try not to use your iPad while it’s charging and running heavy apps at the same time. That combo gets things really hot.
If your iPad feels hot or starts lagging, let it cool down before you keep using it.
Shop Chesona’s iPad Cases and Keyboards for Long-Term Protection
Chesona makes cases built to help prevent screen damage on iPad Pro models. Their stuff has multiple layers and good ventilation.
What stands out with Chesona:
- Shock-absorbing corners for drops
- Even weight distribution across the back
- Heat-dissipating materials to help keep things cool
- Precise cutouts that don’t create pressure points
Their keyboard cases attach in a way that spreads out the force. The connection isn’t just one spot, so you’re less likely to get pressure marks.
Chesona also adds raised edges around the screen, so when you set it face-down, the display doesn’t touch the table.
Pick a case that matches how you use your iPad. Heavy users need more protection than someone who keeps theirs at home most of the time.
Protect your iPad and enjoy hands-free use anywhere with durable iPad cases with stand built for comfort and versatility.
Conclusion: iPad Pro 10.5 White Spot on Screen
White spots on your iPad Pro 10.5 screen can be annoying, but catching them early helps prevent more serious display damage. Whether it’s heat, pressure, or internal wear, knowing the cause makes it easier to decide between a quick check or a full repair.
Using a sturdy case and avoiding prolonged heat exposure can go a long way in keeping your screen clear and bright. If the white spot doesn’t fade, a professional screen replacement is usually the best fix.
Next up: iPad Won’t Turn On? Here’s What to Do
Frequently Asked Questions
iPad Pro 10.5 owners always seem to ask about white spots from heat or display cable issues. These spots usually show up 1-2 inches above the home button and, unfortunately, often need a screen replacement to really fix.
How to fix white spots on iPad screen?
Restart your iPad by holding the power and home buttons for 10 seconds. Check if the spots appear in all apps—if they do, it’s likely hardware-related. For the iPad Pro 10.5, heat damage often causes this, and a screen replacement is usually the only fix.
Why is there a small white dot on my iPad screen?
White dots appear when pixels or screen layers are damaged. On the iPad Pro 10.5, pressure from internal components often causes this issue. Heat or minor drops can also lead to permanent bright spots.
How to get rid of a bright spot on an iPad?
Lower your brightness or use dark mode to make the spot less visible. Remove your screen protector to check for trapped air or pressure. If the bright spot remains, a professional screen replacement is the only lasting solution.
What are the symptoms of a dying iPad?
A failing iPad may freeze, restart randomly, or drain battery quickly. You might notice laggy touch response or flickering display colors. Overheating, slow performance, and frequent storage warnings are also common signs.
