Your iPad is your go-to device for reading, streaming, and getting things done. If your iPad battery drains faster than it used to, you might wonder about its battery health.
Knowing how to check battery health on iPad helps you spot problems early and keep your device running smoothly.
This guide will show you how to check battery health on iPad, what the numbers mean, and what to do if your battery is not lasting as long as it should. You will also find easy tips to make your iPad battery last longer.
What Does Battery Health Mean on an iPad?
Battery health is a measure of how well your iPad’s battery can hold a charge compared to when it was new. Over time, all batteries wear out a little with each charge cycle.
As your battery ages, it might not last as long on a single charge, or your iPad could suddenly shut down even when it says there’s charge left.
Common signs your iPad battery is getting old include:
- Needing to charge more often
- iPad turns off unexpectedly
- Battery percentage jumps up and down
- Device feels hot while charging or using
Understanding battery health can help you decide if you need a new battery or just need to tweak some settings.
Which iPads Can Check Battery Health in Settings?
Apple has added a Battery Health section to the Settings app for certain iPad models.
You can check battery health and history on these models:
- ✅ iPad Pro (M4)
- ✅ iPad Air (M2 and M3)
- ✅ iPad mini (A17 Pro)
- ✅ iPad (A16)
On other iPads, the Battery Health section is not available. You will need to use the alternative methods described below.
How to Check Battery Health and Battery History on Supported iPads
If you have one of the supported iPad models, checking your battery health is simple:
- Open Settings.
- Tap Battery.
- Tap Battery Health.
On this screen, you will see:
- Battery Health Status (for example, "Normal")
- Maximum Capacity (percentage, such as 100%)
- Battery manufacturing date
- First use date
- Cycle count
A battery is considered healthy if the Maximum Capacity is close to 100% and the status says "Normal."
Over time, as your iPad goes through charge cycles, this number will go down.
What is a Charge Cycle on iPad?
A charge cycle is completed when you have used an amount of battery equal to 100 percent of your battery’s original capacity, even if it was not all at once.
For example, if you use 50 percent one day and recharge, then use 50 percent the next day and recharge, that counts as one cycle.
Apple designs iPad batteries to retain up to 80 percent of their original capacity at 1000 complete charge cycles. This usually means two or three years of normal use before you notice a big drop in battery life.
📌Looking for more ways to make your iPad battery last? Check out our tips for maximizing the lifespan of your iPad battery.
How to Check Battery Health on Older iPads (Without Battery Health in Settings)
If your iPad does not have the new Battery Health section, you cannot see the battery health percentage or cycle count directly on the device.
However, you can still check for signs of battery wear using built-in tools and your computer.
Use Built-In Settings
- ✅ Go to Settings > Battery
- ✅ Review battery level and activity graphs
- ✅ Check “Battery Usage by App” for any apps using too much power
If you notice quick drops in battery percentage or unexpected shutdowns, your battery may be wearing out.
Use a Mac or PC with Third-Party Apps
Finder and iTunes do not show your iPad’s battery health percentage or cycle count. They only show charge status and basic battery info. For battery health details, you need to use a third-party app on your computer.
Apps like CoconutBattery (for Mac) or iMazing (for Mac and PC) can show you your iPad’s battery health, cycle count, and more—but only when your iPad is connected to your computer.
These apps are not available on the App Store for direct use on your iPad, and you must connect your device by cable to your computer to read this information.
Always download from trusted sources and be careful with apps that ask for too many permissions.
How to Know When Your iPad Battery Needs Replacing
It is normal for batteries to lose some power over time, but here is how to know if yours needs attention:
- ✅ Your iPad cannot hold a charge for even a few hours
- ✅ The device gets hot during normal use
- ✅ You see error messages about battery service
- ✅ Battery percentage jumps around or drops fast
Most iPad batteries are designed to last about 1000 complete charge cycles, retaining up to 80 percent of their original capacity. If you use your iPad every day, that is usually two or three years before you notice a big drop in performance.
If your iPad is still under warranty or AppleCare Plus, battery replacement might be covered if the battery holds less than 80 percent of its original capacity. I
f not, you can still get it replaced at an Apple Store or authorized repair shop.
Tips to Improve and Maintain Your iPad Battery Health
Want your iPad battery to last longer? Try these easy tips:
- ✅ Do not let your battery drop to zero percent often. Try to keep it between 20 percent and 80 percent
- ✅ Avoid extreme heat and cold. High temperatures can damage your battery fast
- ✅ Turn on Low Power Mode when your battery is running low
- ✅ Update your iPad to the latest iPadOS for battery improvements
- ✅ Close apps you are not using and lower your screen brightness
- ✅ Use Wi-Fi instead of cellular when possible
Where to Get Help with iPad Battery Issues
If you have tried everything and your iPad battery is still draining fast, it might be time for expert help.
Here is what you can do:
- ✅ Contact Apple Support for a battery health check or diagnostics
- ✅ Visit an Apple Store or authorized service provider for a battery replacement quote
- ✅ Check your warranty or AppleCare Plus. Battery service is often included if your battery holds less than 80 percent of its original capacity
📌Do not forget to browse our guide on how to make your iPad last longer for more device care tips!
Conclusion
Checking battery health on your iPad helps you spot battery problems and keep your device running strong.
By watching your battery usage, using trusted apps for extra info, and following smart charging habits, you can make your iPad battery last longer and avoid sudden shutdowns.
Remember, all batteries wear out eventually. If you notice signs of a weak battery, do not wait. Take action to keep your iPad in top shape.
Frequently Asked Questions About iPad Battery Health
How do I know if my battery is bad on my iPad?
You will notice your iPad does not hold a charge as long as it used to, shuts down unexpectedly, or the battery percentage changes quickly. Sometimes, your device may feel hot or you will see a warning message about battery service. If these happen often, your battery may need replacing.
Do iPads lose battery health?
Yes, all iPads lose battery health over time as you charge and use them. Each charge cycle slowly reduces the battery’s capacity. Good charging habits and avoiding extreme temperatures can help slow this down.
What is the lifespan of an iPad battery?
Most iPad batteries are built to last about 1000 full charge cycles, which is usually two or three years for most people. After that, you may notice shorter battery life and need a replacement.
Is 70% a good battery health?
A battery health of 70 percent means your battery can only hold 70 percent of its original charge. This is considered low, and you will probably notice shorter battery life. It is a good idea to think about replacing your battery soon.
Related articles:
How to Connect External Display to iPad: A Simple Guide
Best iPad Apps To Enhance Your Digital Experience in 2025
